Phone: 204.261.9600 Fax: 204.261.5005 Mon-Fri: 6:30 AM to 5 PMSat: 8 AM to 12 PMSun: Closed
Proudly Canadian - Equipment Rentals
Manitoba’s Construction Equipment Rental & Sales Specialists

Concrete Equipment

Below are our rental rates for per day, per week and per 4 weeks. To rent our equipment, or for more information, please stop by our office at 410 Turenne Street in Winnipeg, MB Canada. Or feel free to contact us if you have any questions.
 
Item #
Description
 
Day
Week
4 Weeks
GRINDER 7” RIGHT ANGLE—AIR
1250
GRINDER 7” RIGHT ANGLE—AIR
6000 RPM, 8 lbs., requires 7 cfm @ 90 psi
 
Day: $22.00
Week: $88.00
4 Weeks: $176.00
AIR QUICK CUT SAW 14”
1260
AIR QUICK CUT SAW 14”
Air motor, air req. 100 cfm, 9.8kg/21.6lbs., cut depth 5”, wet/dry use
 
Day: $50.00
Week: $200.00
4 Weeks: $500.00
CONCRETE MIXER ELECTRIC 1.5 CU.FT. Knockdown
1701
CONCRETE MIXER ELECTRIC 1.5 CU.FT. Knockdown
115V, pedestal or wheelbarrow models
 
Day: $32.00
Week: $118.00
4 Weeks: $235.00
CONCRETE MIXER GAS 3 CU.FT. Towable
1703
CONCRETE MIXER GAS 3 CU.FT. Towable
5.5HP gas engine, ½ bag capacity, 375 lbs. max., 69”L x 44”W x 61”H
 
Day: $45.00
Week: $175.00
4 Weeks: $440.00
CONCRETE MIXER ELEC. 3 CU.FT. Towable
1704
CONCRETE MIXER ELEC. 3 CU.FT. Towable
0.5HP electric motor, ½ bag capacity, 375 lbs. max., 69”L x 43.5”W x 72”H
 
Day: $45.00
Week: $175.00
4 Weeks: $440.00
MORTAR MIXER GAS 6 CU.FT. Towable
1706
MORTAR MIXER GAS 6 CU.FT. Towable
5.5HP gas engine, 2½ bag capacity, 560 lbs. max.,89.5”L x 45”W x 49”H
 
Day: $60.00
Week: $180.00
4 Weeks: $540.00
MORTAR MIXER ELEC. 6 CU.FT. Towable
1707
MORTAR MIXER ELEC. 6 CU.FT. Towable
1.5HP electric motor, 2½ bag capacity, 560 lbs. max., 89.5”L x 45”W x 49”H
 
Day: $60.00
Week: $180.00
4 Weeks: $540.00
CONCRETE MIXER ELEC. 9 CU.FT. Towable
1709
CONCRETE MIXER ELEC. 9 CU.FT. Towable
1.5HP electric motor, 1½ bag capacity, 860 lbs. max., 98”L x 51.5”W x 70”H
 
Day: $90.00
Week: $340.00
4 Weeks: $900.00
MORTAR MIXER GAS 12 CU.FT. Towable & skid mounted
1712
MORTAR MIXER GAS 12 CU.FT. Towable & skid mounted
13HP gas engine, 4-5 bag capacity, available in hydraulic
 
Day: $120.00
Week: $480.00
4 Weeks: $1,100.00
POWER BUGGY GAS 16 CU. FT.
1716
POWER BUGGY GAS 16 CU. FT.
13HP gas engine, 11.5L fuel capacity, 16 cu. ft. bucket capacity, 94”L x 43.25”W x 54”H, weight: 1250 lbs. empty/2500 lbs. full
 
Day: $125.00
Week: $500.00
4 Weeks: $1,125.00
CONCRETE BUCKET 2 YARD
1733
CONCRETE BUCKET 2 YARD
steel, bottom dump
 
Day: $120.00
Week: $375.00
4 Weeks: $975.00
TOW BEHIND CONVEYOR
1720
TOW BEHIND CONVEYOR
- 24' long - 1.5 HP electric engine 110 volts - Weight : 685 lbs
 
Day: $130.00
Week: $530.00
4 Weeks: $1,225.00
POWER SCREED GAS w/ SCREED BAR
1725
POWER SCREED GAS w/ SCREED BAR
4 cycle gas engine, 31cc, Various bar sizes from 6' to 14'.
 
Day: $55.00
Week: $200.00
4 Weeks: $475.00
POWER TROWEL ELECTRIC 30
1735
POWER TROWEL ELECTRIC 30"
Electric
 
Day: $75.00
Week: $300.00
4 Weeks: $600.00
POWER TROWEL GAS 36” w/ FLOATS
1736
POWER TROWEL GAS 36” w/ FLOATS
5.5HP gas engine, 165 lbs., clip-on float blade 10” x 14”, finish blade 6” x 14”
 
Day: $55.00
Week: $220.00
4 Weeks: $500.00
POWER TROWEL GAS 46” w/ FLOATS
1746
POWER TROWEL GAS 46” w/ FLOATS
9.0HP gas engine, 245 lbs., clip-on float blade 10” x 18”,finish blade 6” x 18”
 
Day: $65.00
Week: $275.00
4 Weeks: $590.00
VIBRATOR 2 HP ELEC. w/ HEAD & SHAFT
1786
VIBRATOR 2 HP ELEC. w/ HEAD & SHAFT
115V, 15 amp, Various head & shaft sizes available.
 
Day: $42.00
Week: $125.00
4 Weeks: $300.00
VIBRATOR 3 HP ELEC. w/ HEAD & SHAFT
1787
VIBRATOR 3 HP ELEC. w/ HEAD & SHAFT
115V, 15 amp, Various head & shaft sizes available
 
Day: $55.00
Week: $175.00
4 Weeks: $435.00
SPS MACHINE GAS (Scarfier)
1750
SPS MACHINE GAS (Scarfier)
Horse Power: 5HP, Cutting Depth Adjustment: Screw type with Quik- Pitch® Maximum cutting depth: 5/8 inch (16 mm) Maximum cutting width: 8 inch (203 mm) Dust port connection: 3 inch (76 mm) (GENERAL unit) General and Bartell units
 
Day: $125.00
Week: $500.00
4 Weeks: $1,250.00
DRILL CORE 1
1790
DRILL CORE 1"-4"
1,725 W power, 10 A, (230 V), 15 A, (110 V). Lightweight, only 12 lbs. 3 speeds, 580/1400/2900 for optimum cutting. Pivoting handle for comfortable working conditions. Recommended drilling diameter, max 4" handheld.
 
Day: $100.00
Week: $287.00
4 Weeks: $860.00
DRILL CORE 1
1792
DRILL CORE 1"-10" CAPACITY WITH STAND
Drill motor: 115V, 14A, 15 lbs., can be hand-held, Pump: 115V, 4.2A, for suction base, Stand: 16?”L x 7?”W x 33”H
 
Day: $118.00
Week: $412.00
4 Weeks: $1,190.00
CORE DRILL WATER TANK
1795
CORE DRILL WATER TANK
3 gallon
 
Day: $5.00
Week: $15.00
4 Weeks: $45.00
DRILL MUDD MIXER ELECTRIC C/W PADDLE
2045
DRILL MUDD MIXER ELECTRIC C/W PADDLE
•Motor Power: 1.6/1.2 •Mixing Volume: 30 •Paddle Fitting: M14 x 2 •Max. Paddle Diameter: 5.5 •115V - 60 Hz •Weight no Paddle: 12 lbs •Weight w/Paddle: 15.4 lbs •Height w/Paddle: 34" H
 
Day: $35.00
Week: $90.00
4 Weeks: $180.00
NAILER POWDER ACTUATED
2222
NAILER POWDER ACTUATED
1½” - 2” nails, requires .25 cal “red” shots, 10 shots/strip. Application: Concrete fastening
 
Day: $28.00
Week: $80.00
4 Weeks: $150.00
WHEEL BARROW SOLID TIRE
6210
WHEEL BARROW SOLID TIRE
Wheel Barrow
 
Day: $20.00
Week: $40.00
4 Weeks: $60.00
BRICK SPLITTER MANUAL
6268
BRICK SPLITTER MANUAL
max. cutting width 16”, max. cutting height 5¾”, 125 lbs.
 
Day: $25.00
Week: $100.00
4 Weeks: $200.00
WALK BEHIND BROOM BRISTLE 24
7609
WALK BEHIND BROOM BRISTLE 24"
Engine 208cc Kohler Command Pro Multi Season, Starter Recoil, Transmission Friction Disk, Steering Controls Power steering - RH/LH Clutch, Drive System Direct, Drive Tires 15" x 5", Speeds 6 Forward / 2 Reverse, Weight 350 lbs, Broom Caster Tire Adjustable, Broom Diameter 25", Broom Rotation Angle 20 degrees each side, Broom Rotation Control Thumb Latch, Broom Speed 200 RPM, Broom Width 36" (91 cm), Tie Down Points 4 Locations
 
Day: $175.00
Week: $700.00
4 Weeks: $2,000.00
TILE TABLE SAW 10” ELECTRIC
7610
TILE TABLE SAW 10” ELECTRIC
115V, 14.6A full load, 2760 rpm, 3¾” max. depth of cut, 34¼”L x 21”W x 19¾”H, 105 lbs., c/w water pump,
 
Day: $50.00
Week: $200.00
4 Weeks: $400.00
MASONRY TABLE SAW 14” ELECTRIC (Wet Cut)
7620
MASONRY TABLE SAW 14” ELECTRIC (Wet Cut)
115V, 14.6 full load, 2150 rpm, 5” max. depth of cut, 38”L x 19½”W x 27”H, 160 lbs., 1” arbor, c/w water pump, Rip cut, 45º/90º cutting guide
 
Day: $50.00
Week: $240.00
4 Weeks: $500.00
MASONRY SAW 14
7621
MASONRY SAW 14" ELECTRIC FOR DRY CUTTING
Voltage 120V Horse Power 1-3/4 H.P. Amps 15 Blade RPM 3,500 Blade Capacity 14" (356mm) Arbor Size 1" (25mm) Max. Material Size 8" x 8" x 16" Depth of Cut 5" (127mm) Length of Cut 16" (406mm) L x W x H 35" x 24" x 21" L x W x H (mm) 889 x 610 x 533 Weight 70 lbs. (32 kg.)
 
Day: $55.00
Week: $165.00
4 Weeks: $330.00
GAS WALK-BEHIND SAW 14” 13 HP
7640
GAS WALK-BEHIND SAW 14” 13 HP
13HP gas engine, 2610 rpm, 4 5/8" max. depth of cut, 30½”L x 16”W x 37¼”H, 274 lbs.
 
Day: $55.00
Week: $220.00
4 Weeks: $400.00
GAS QUICK CUT SAW 12”
7650
GAS QUICK CUT SAW 12”
Air-cooled, two cycle engine, 71cc, 19.5lbs., 5100 rpm nominal speed, 0.7 litres mixed gas, cut depth 4”, wet/dry use
 
Day: $40.00
Week: $160.00
4 Weeks: $375.00
ELECTRIC QUICK CUT SAW 12
7675
ELECTRIC QUICK CUT SAW 12" or 14”
120V, 2300W, 15 amps, 4500 rpm, weight 9.0kg / 19.8lbs., dry and wet saws available.
 
Day: $40.00
Week: $160.00
4 Weeks: $375.00
GAS QUICK CUT SAW 14”
7700
GAS QUICK CUT SAW 14”
Air-cooled, two cycle engine, 71cc, 19.5lbs., 5400 rpm nominal speed, 0.7 litres mixed gas, cut depth 5”, wet/dry use
 
Day: $56.00
Week: $226.00
4 Weeks: $441.00
SOFF CUTT SAW
7711
SOFF CUTT SAW
Output RPM 3500 rpm Diamond blade, max 14 " Max cutting depth 3 inch Blade depth control Electric
 
Day: $250.00
Week: $1,000.00
4 Weeks: $2,500.00
ROAD SAW 40 HP WALK BEHIND
7730
ROAD SAW 40 HP WALK BEHIND
Arbor Size 1" Blade Capacity 26" Blade Length 26 Blade Shaft Drive Belted Cutting Depth Indicator Yes Drive Speed 0-200 Electric Start Yes Fuel Type Gasoline Horsepower 40 Hourly Usage Meter Yes Max Depth Of Cut 10.375 Product Weight 970 Quick Disconnect Flanges Yes Self Propelled Yes Telescoping Front Pointer Yes
 
Day: $150.00
Week: $500.00
4 Weeks: $1,450.00
ROAD SAW 65 HP WALK BEHIND
7765
ROAD SAW 65 HP WALK BEHIND
Walk Behind Saw, 26 in Blade Diameter, 1 in Arbor Diameter, 10.5 in Depth of Cut, 146.5 cu-in Engine Displacement, 66 hp, 9.75 gal Fuel, 1800 rpm,
 
Day: $150.00
Week: $600.00
4 Weeks: $1,800.00

Sign Up for our Monthly Flyer

Monthly Flyer Subscription

Enter your name and email address to be added to our mailing list for future monthly flyers

First Name :

Last Name :

Email :

   

2014 Copyright Rental Experts Winnipeg – All Rights Reserved | Website designd by EliteDesigns.ca